JConcepts - 1/10th, 1/8th and SCT Striker setup board w/ foam pad
Part # - 2102
(Compatible with all 1/10th, 1/8th and SCT vehicles)
JConcepts wants you to be the Pit Boss with the introduction of the Striker Setup Board. JConcepts’ primary focus is always on performance and adjustments such as ride height, camber and toe are some of the most critical adjustments. Having a portable, convenient and flat working surface allows a driver to make necessary pit adjustments with speed, consistency and accuracy.
The setup board has JConcepts written all over it with a brilliant Striker logo on top for the most decorated finish. The bottom can be outfitted with the included foam pad which adds depth, work space and a flexible footing for irregular surfaces. Cleaning, maintaining and setting up any vehicle is important to performance, choose the Striker Setup Board from JConcepts.
Note – for best results always treat the setup board with care. Store in a cool, dry environment in a flat position to maintain consistent shape. Surface graphics have shown to be durable and resistant to normal usage. For maintaining the best appearance, always use caution when cutting, building or sliding components on work surface.
Locate the setup board and foam pad as included in each package. The foam pad installation is very critical, please build with extra caution. Begin by peeling the backing off the foam material while getting accustomed to the size, shape and orientation for which it applies to the board. Align the pad to board and be sure to orientate the handle opening in the proper position. Easy does it! The foam will stretch and change dimension easily so understand the flexibility and handle lightly. Stick only a small portion of the pad at a time while aligning ever so gently across and down the board. Once areas are stuck and aligned, move further down the board until complete. Patience is a virtue!
• Lightweight material
• Convenient size / shape with handle
• Brilliant Striker logo and graphics
• Included foam sectioned pad for the bottom surface