Contact Information
Hours of Operation:
9:00 - 5:00 EST

Mailing Address:
JConcepts Inc.
15370 CR 565A, Ste C
Groveland, FL 34736

Telephone Numbers:
352-241-4976 Office
352-243-5904 Fax







PRESS

RECENT ARCHIVE

posted: 10.19.2012Illuzion -Scalpel Speed Run body - for your Slash 4x4

Scalpel Bumper Conversion Kit

For immediate release –


Illuzion - Slash 4x4 - Scalpel Speed Run body
Part # - 0240
(fits Slash 4x4 with #2173 JC bumper conversion kit) 
Click here to order yours today, convert your Slash 4x4 and go for it!  

Product Video

Bumper Conversion Video

Speed is everything; it’s the greatest gift of R/C and particularly with the Traxxas Slash 4x4.    An extremely popular off-road truck, the Slash 4x4, has all the components of an absolute beast of an on-road vehicle.    JConcepts introduces the Scalpel speed-run body and front bumper conversion to convert the Slash 4x4 into an insane speed-run machine.    Take on your personal salt-flats, drag strip or closed circuit course with power, speed, agility and style with JConcepts.

Looking straight into the headlights you can tell right away something is different about the Scalpel.    A menacing look from the front-end highlighted by a dramatic chin-spoiler, the front-end is built for speed and direction.    Large fenders allow plenty of clearance for the 2.8” G-Locs tires and the extremely low roof-line cuts like a knife.    A shallow bed area gives the Scalpel a truck-like appearance while maintaining that all inclusive speed-line structure.     Finishing off the body is clean and smooth with the inclusion of grill, headlight, taillight and miscellaneous logos that make the Scalpel look the part.   

Features:
• Original JConcepts Scalpel design and concept
• Chiseled front-end with chin-spoiler
• Extremely low-profile roof-line
• Large fenders to allow tire clearance
• Shallow bed area, truck-line appearance
• Includes detailed Scalpel decal sheet

Making the conversion:

Converting the Slash 4x4 to the Scalpel speed-run vehicle requires body, bumper conversion and tires and wheels are highly recommended.    The assembly is simple and takes only minutes to complete.    First, remove stock bumper assembly and replace with the newly acquired speed-run accessories and foam bumper.   Make small changes to suspension set-up to limit down and up travel per instructions.    Detail, paint and trim Scalpel body.   Prep, mount and glue JConcepts 2.8” G-Locs tires onto 2.8” Rulux wheels and secure to the vehicle.    Locate, mark and ream the body mount locations and drop Scalpel body into place.    Hit your favorite closed circuit for the wildest speed-runs imaginable. 

• 0240 - Illuzion - Slash 4x4 - Scalpel Speed Run body
• 2173 - Slash 4x4 - front bumper conversion kit
• 3056-00 - G-Locs - yellow compound - (fits 2.8" wheel)
• 3340B - Rulux - 2.8" E-Stampede - Rustler 2wd front and 4x4 F&R wheel

Slash 4x4 - front bumper conversion kit (converts front end to accept #0240 Scalpel body)
Part # - 2173
(fits Slash 4x4, converts front end to accept #0240 Scalpel body)

Building the unique Scalpel speed-run vehicle centers around a new bumper design and layout.     The front bumper conversion kit comes complete with an assortment of high-end parts to ready the Slash 4x4 for function and durability.    Fiberglass upper and lower plates with hinge pin retainer build a stout structure.    Low-profile, aluminum body mounts for all 4 corners are included to slam the body to speed-run standards.   Bulky aluminum stand-offs and cushy / protective “touring car” style bumper assembled with high-end 3 and 4mm hardware throughout tighten the complete assembly.   

Features:
• Original JConcepts Scalpel design and concept
• Top quality fiberglass, aluminum and steel materials
• Aluminum, low profile body mounts for all 4 corners
• 3 and 4mm hardware included throughout
• High impact “touring car” style foam front bumper
• Detailed instruction sheet

Making the conversion:

Converting the Slash 4x4 to the Scalpel speed-run vehicle requires body, bumper conversion and tires and wheels are highly recommended.    The assembly is simple and takes only minutes to complete.    First, remove stock bumper assembly and replace with the newly acquired speed-run accessories and foam bumper.   Make small changes to suspension set-up to limit down and up travel per instructions.    Detail, paint and trim Scalpel body.   Prep, mount and glue JConcepts 2.8” G-Locs tires onto 2.8” Rulux wheels and secure to the vehicle.    Locate, mark and ream the body mount locations and drop Scalpel body into place.    Hit your favorite closed circuit for the wildest speed-runs imaginable. 

• 0240 - Illuzion - Slash 4x4 - Scalpel Speed Run body
• 2173 - Slash 4x4 - front bumper conversion kit
• 3056-00 - G-Locs - yellow compound - (fits 2.8" wheel)
• 3340B - Rulux - 2.8" E-Stampede - Rustler 2wd front and 4x4 F&R wheel


All bodies are sold clear and are shown painted for advertising purposes only. Tires, wheels and bodies are sold separately, unless otherwise specified.  JConcepts reserves the right to update or make changes to product, packaging or contents.

Revo®, JATO™, T-MAXX™, SLASH®, SLASH 4X4® etc. are trademarks and registered trademarks of Traxxas L.P.